Budget NVMe Overclocking Ready? Check Out the Premium UpHere M201 Heatsink at Only $5

Until recently, cooling for storage was at best an afterthought for most enthusiasts and PC builders – it really wasn’t a concern outside of servers jam-packed full of drives. But current-generation PCIe 5 SSDs can transfer more data faster than ever before, and pushing those speeds can generate a fair bit of extra heat. With these modern drives, not only is some kind of cooling recommended, but it’s generally a requirement to prevent throttlingor even crashing in some instances .

Over the past few years, cooling companies have released a wide variety of heatsinks and coolers for NVMe SSDs to ensure that they can maintain their maximum speeds. Heatsinks large and small, with or without active fans (andeven liquid cooling solutions ) are now available for NVMe SSDs.

Our recent NVMe heatsink reviews have focused on the strongest units available on the market, suitable for users with intense storage workloads and high ambient temperatures – but the fact is most users don’t need such strong solutions. In this review, we’ll take a look at UpHere’s M201 SSD Heatsink, which is an entry-level solution aimed at mainstream users. We’ve recently testedUpHere’s C5C Air Cooler and found it one of the better low-end coolers on the market.

• UpHere M201 SSD Heatsink (SSD) at Amazon for $4.99

Cooler specifications

Swipe to scroll horizontally

Today’s best UpHere M201 SSD Heatsink deals

29 Amazon customer reviews

☆ ☆ ☆ ☆ ☆

upHere M2 Heatsink Copper SSD… ](https://target.georiot.com/Proxy.ashx?tsid=45723&GR%5FURL=https%3A%2F%2Fwww.amazon.com%2Fdp%2FB09CPQFWZB%3Ftag%3Dhawk-future-20%26linkCode%3Dogi%26th%3D1%26psc%3D1%26ascsubtag%3Dtomshardware-us-7947238956102210602-20 )

Amazon ](https://target.georiot.com/Proxy.ashx?tsid=45723&GR%5FURL=https%3A%2F%2Fwww.amazon.com%2Fdp%2FB09CPQFWZB%3Ftag%3Dhawk-future-20%26linkCode%3Dogi%26th%3D1%26psc%3D1%26ascsubtag%3Dtomshardware-us-7947238956102210602-20 )

Prime ](https://target.georiot.com/Proxy.ashx?tsid=45723&GR%5FURL=https%3A%2F%2Famazon.com%2Ftryprimefree%3Ftag%3Dhawk-future-20%26ascsubtag%3Dhawk-custom-tracking-20 )

$4.99

View

We check over 250 million products every day for the best prices

Packing and included contents

The packaging of the SSD heatsink is a bit different from similar products, with the box arriving in a resealable electrostatic shielding bag.

LATEST VIDEOS FROM tomshardware Tom’s Hardware

(Image credit: Tom’s Hardware)

Opening the box reveals the contents, protected by molded foam.

(Image credit: Tom’s Hardware)

Included with the package are the following:

• Two thermal pads
• Two clips
• Top and bottom sections of the heatsink

(Image credit: Tom’s Hardware)

Features of UpHere’s M201 NVMe SSD Heatsink

*️⃣ No compatibility concerns, will fit with any air cooler or dGPU

As this heatsink is roughly the same height as a PCI-e slot, it won’t cause any compatibility issues with other components. Larger NVMe SSD heatsinks often won’t fit underneath many air coolers due to their size.

UpHere M201 SSD Heatsink pictured next to ASRock Steel Legend 7900 GRE graphics card and Valkyrie SYN 360 AIO. (Image credit: Tom’s Hardware)

*️⃣ Cheaper than Starbucks at only $4.99 USD

Most NVMe SSD heatsinks are not expensive, typically costing between $10 and $20 USD. UpHere’s M201 is about as cheap as they come, costing just $4.99 in the U.S.

*️⃣ Jagged heatsink design takes advantage of native airflow

While the M201 doesn’t have a fan cooling the heatsink, its jagged design will take advantage of existing airflow in the case. This means that it will perform better in systems using air cooling, if installed in the M.2 slot next to your CPU. Alternatively, this also means that it would perform worse in a bottom side M.2 slot where there is less airflow or when a liquid cooler is installed instead of air cooling.

(Image credit: Tom’s Hardware)

*️⃣ Double-sided SSD support

Many of the cheapest M.2 NVMe heatsinks only make contact with the top half, meaning that any NAND placed on the underside is unprotected. UpHere’s M201 features double-sided protection, ensuring peak performance for both single- sided and double-sided M.2 SSDs.

What I don’t like about the UpHere M201

*️⃣ Annoying clips during installation

The installation of the heatsink isn’t particularly difficult, but the use of clips between the heatsink’s halves might make installation difficult for novice users.

OtsAV TV Webcaster

How hot is too hot? Does cooling even matter for an SSD?

With SSD heatsinks, many will understandably be asking if it really matters. And if you’re a typical user who mostly just loads a few applications and games, you probably don’t need an advanced heatsink with a fan. I’ve run a variety of tests, and for common tasks like loading a game or application, you generally don’t need more than a basic heatsink – at least not with current SSDs and workloads.

If you need heavy-duty cooling for your drives, you probably already know it. This includes users whose workloads are IO-intensive or involve high-resolution video editing.

We’re also trying to look to the future here, to an extent. Today’s common workloads might not need anything more than a basic heatsink, but this may change withPCIe 6 and future standards, which will allow for higher speeds (and probably higher power consumption) in consumer SSDs.

After consulting storage experts across the industry who work for popular storage brands, I’ve created an IOMeter script that’s specifically designed to stress an SSD’s controller and NAND, causing it to reach its maximum temperature (also known as TJ Max). The ambient temperature is maintained at 23 degrees Celsius while these tests are performed. The SSD used isTeamgroup’s Z540 SSD , which is powered byPhison’s E26 controller .

This test will cause throttling when paired with lower-end heatsinks. For those heatsinks, we’ll be looking at the IOPS of the drive during testing. The more advanced heatsinks and coolers will be capable of keeping the SSD under its peak temperature – for these units, we’ll compare the actual temperatures of the TeamGroup Z540 SSD.

If peak performance in common scenarios like gaming is your only goal, then most basic heatsinks will offer satisfactory performance. However, users with storage-intensive workloads will require a stronger heatsink in order to prevent the SSD’s performance from throttling. The impact of this potential throttling can vary; lighter loads won’t be impacted as much, but in the worst-case scenario I tested, I measured a 92% loss of performance without cooling on a PCIe 5.0 SSD.

You might think that’s the only aspect to consider when looking at a heatsink, but the thermals of an SSD also have a huge impact on a drive’s longevity. Much like other electronic components, extreme variations in temperature causes wear and tear, reducing lifespan. Now let’s be real here - most users shouldn’t need to worry about longevity and instead should purchase a drive from a reliable manufacturer, with a good warranty. While this is our general recommendation, there are scenarios where this won’t apply – for instance,if you purchased a refurbished SSD at a discount, you can’t expect to have a long warranty.

Finally, there’s the matter of dealing with the hassle of a warranty. While it is nice to know that a failing drive will be replaced by the manufacturer, why create an environment where such a claim is likely to happen? I’d argue that it would be wiser to invest $10 or $15 (or just $5 in this instance) into a heatsink to extend the lifespan of your SSD so that you don’t have to worry about dealing with the paperwork and time involved in processing a warranty claim.

In theory, if your NVMe SSD arrives with a heatsink from the manufacturer, you shouldn’t need to worry about a heatsink at all. Most of the heatsinks I’ve seen paired with high-end PCIe 5 SSDs are capable of handling strong thermal loads. However, many drives do not include a heatsink and it would not be wise to run a high-speed PCIe 5 SSD entirely uncooled, as performance will suffer even in common workloads.

When it comes to heatsinks for SSDs, the important thing to take away here is that it’s best practice to minimize temperature variations for the health and longevity of your SSD. How strong of a heatsink you’ll need is another matter for debate.

Testing configuration – Intel LGA1700 platform

Swipe to scroll horizontally

To test the heatsinks, I’ve created a custom IOMeter script created with input from experts in the industry. I run an initial test of 30 minutes after installing the heatsink to burn it in. After turning the system off and allowing it to cool down, I run another 30-minute test. I’ll repeat the process for verification and if there is no variance, I consider the results accurate. If there is variance, I’ll test the heatsink two more times.

Tests are performed inside of a real case,BeQuiet’s Silent Base 802 . I use a 360 mm AIO to avoid having the CPU Cooler potentially impact the results, but there’s an argument to be made that the smallest heatsinks should be tested under an air cooler. We’ll investigate this further in upcoming reviews to see how much – or little – this can impact the results of lower-end heatsinks.

All testing is performed with an ambient temperature of 23 C.

Installation

The installation of this SSD heatsink isn’t hard per se, but it isn’t quite as simple as most others on the market.

The first step is to take one of the included thermal pads and apply it to the base of the heatsink.

Allavsoft Batch Download Online Videos, Music Offline to MP4, MP3, MOV, etc format

(Image credit: Tom’s Hardware)

Next, you’ll need to place the SSD on top of the thermal pad, and then place the second thermal pad on top of the SSD. Then, slide the top half of the heatsink under the groves shown above.

(Image credit: Tom’s Hardware)

The next step can be slightly frustrating if you aren’t patient and / or don’t know what you’re doing. You’ll want to take the clip and slide it underneath the grooves shown in the picture above. Make sure the open side of the clip is facing down to maintain proper pressure.

The Tube Sites Submitter is a fast and efficient tool for anyone who needs to upload videos quickly, easily and automatically to hundreds of tube sites in mere minutes .

(Image credit: Tom’s Hardware)

The last step is to slide the heatsink into an available M.2 slot and secure it. Some users will have m.2 screws for this purpose; others might have sliding latches. As long as it is secure, it doesn’t matter which method you use.

(Image credit: Tom’s Hardware)

UpHere M201 SSD Heatsink: Price Comparison

29 Amazon customer reviews

☆ ☆ ☆ ☆ ☆

upHere M2 Heatsink Copper SSD… ](https://target.georiot.com/Proxy.ashx?tsid=45723&GR%5FURL=https%3A%2F%2Fwww.amazon.com%2Fdp%2FB09CPQFWZB%3Ftag%3Dhawk-future-20%26linkCode%3Dogi%26th%3D1%26psc%3D1%26ascsubtag%3Dtomshardware-us-7947238956102210602-20 )

Amazon ](https://target.georiot.com/Proxy.ashx?tsid=45723&GR%5FURL=https%3A%2F%2Fwww.amazon.com%2Fdp%2FB09CPQFWZB%3Ftag%3Dhawk-future-20%26linkCode%3Dogi%26th%3D1%26psc%3D1%26ascsubtag%3Dtomshardware-us-7947238956102210602-20 )

Prime ](https://target.georiot.com/Proxy.ashx?tsid=45723&GR%5FURL=https%3A%2F%2Famazon.com%2Ftryprimefree%3Ftag%3Dhawk-future-20%26ascsubtag%3Dhawk-custom-tracking-20 )

$4.99

View

We check over 250 million products every day for the best prices

powered by

Also read: