Join the System Architects Marathon in Q4 2015 for a High-Speed LAN PC Box, Now Only $912 AMD Model Available

Component Selection & The Build

System Builder Marathon Q4 2015

Here are links to each of the five articles in this quarter’s System Builder Marathon (we’ll update them as each story is published). And remember, these systems are all being given away at the end of the marathon.

To enter the giveaway, please fill out this SurveyGizmo form , and be sure to read the complete rules before entering!

1. $1184 Gaming PC
2. $1055 Prosumer PC
3. $895 LAN Box PC
4. System Value Compared
5. $912 AMD LAN Box PC

$912 AMD LAN Box PC

Even though my Intel-based revision of this quarter vindicates my assessments last quarter, a number of readers are still convinced that a properly cooled and overclocked 860K is the gateway to budget gaming goodness. After experiencing the limitations and frustrations last quarter, I still have my reservations. However, the SBM is a perfect place to empirically test this and give AMD’s budget quad-core every chance to prove itself.

For your bonus build pleasure, here’s the conclusion to the Munchkin Saga, Episode III: Revenge of 860K.

LATEST VIDEOS FROM tomshardware Tom’s Hardware

CPU CPU ](https://click.linksynergy.com/deeplink?id=kXQk6%2AivFEQ&mid=44583&u1=tomshardware-us-7342335453540989818&murl=http%3A%2F%2Fwww.newegg.com%2FProduct%2FProduct.aspx%3Fcm%5Fmmc%3Dbac-tomshardwaresbm-%5F-systembuildereditorial-%5F-Processors%2520-%2520Desktops-%5F-N82E16819113379%26Item%3DN82E16819113379%26IsFeedbackTab%3DTrue%26nm%5Fmc%3DExtBanner )

AMD Athlon X4 860K

$69.97 at Newegg

$71.79 at Newegg

Check Amazon

Motherboard Motherboard ](https://click.linksynergy.com/deeplink?id=kXQk6%2AivFEQ&mid=44583&u1=tomshardware-us-5628070632920964977&murl=http%3A%2F%2Fwww.newegg.com%2FProduct%2FProduct.aspx%3Fcm%5Fmmc%3Dbac-tomshardwaresbm-%5F-systembuildereditorial-%5F-Intel%2520Motherboards-%5F-N82E16813128663%26Item%3DN82E16813128663%26IsFeedbackTab%3DTrue%26nm%5Fmc%3DExtBanner )

Gigabyte GA-F2A88XN-WIFI

View Site

Cooling Cooling ](https://click.linksynergy.com/deeplink?id=kXQk6%2AivFEQ&mid=44583&u1=tomshardware-us-1140163031250172340&murl=http%3A%2F%2Fwww.newegg.com%2FProduct%2FProduct.aspx%3Fcm%5Fmmc%3Dbac-tomshardwaresbm-%5F-systembuildereditorial-%5F-CPU%2520Fans%2520%26%2520Heatsinks-%5F-N82E16835856007%26Item%3DN82E16835856007%26IsFeedbackTab%3DTrue%26nm%5Fmc%3DExtBanner )

Deepcool Gamer Storm Gabriel

View Site

Swipe to scroll horizontally

Every component is identical to the Intel build earlier this week except the CPU, cooler and motherboard.

The Definition of Insanity

Some of you out there might be groaning and asking, “What, this again?” Hold on a minute. Those asking for a better 860K overclock have a valid argument. The 860K was handicapped last quarter with insufficient cooling to get any kind of meaningful overclock. You can’t argue with that. This time around the CPU gets better treatment in the form of an aftermarket cooler and a larger case. So no, we’re not trying the exact same thing and expecting different results. Do I expect the 860K to outperform the i3-4170? No, I don’t. However, in order for me to prove that one way or the other, I need hard numbers and data. I’m curious to see if it can close the gap, if not overcome it.

Alternate Component Selection

I don’t need to spend time explaining the same parts fromtwo days ago . To save space and time, I’ll only address the three new components.

Stay On the Cutting Edge: Get the Tom’s Hardware Newsletter

Get Tom’s Hardware’s best news and in-depth reviews, straight to your inbox.

Contact me with news and offers from other Future brands Receive email from us on behalf of our trusted partners or sponsors

By submitting your information you agree to theTerms & Conditions andPrivacy Policy and are aged 16 or over.

Image ](https://shop-links.co/link/?exclusive=1&publisher_slug=itechdaily19598&url=https%3A%2F%2Fclick.linksynergy.com%2Fdeeplink%3Fid%3DkXQk6%252AivFEQ%26mid%3D44583%26u1%3Dtomshardware-us-2219239568538077624%26murl%3Dhttp%253A%252F%252Fwww.newegg.com%252FProduct%252FProduct.aspx%253Fcm%255Fmmc%253Dbac-tomshardwaresbm-%255F-systembuildereditorial-%255F-Processors%2B-%2BDesktops-%255F-N82E16819113379%2526Item%253DN82E16819113379%2526IsFeedbackTab%253DTrue%2526nm%255Fmc%253DExtBanner )

AMD Athlon X4 860K

View Deal

Image ](https://shop-links.co/link/?exclusive=1&publisher_slug=itechdaily19598&url=https%3A%2F%2Fclick.linksynergy.com%2Fdeeplink%3Fid%3DkXQk6%252AivFEQ%26mid%3D44583%26u1%3Dtomshardware-us-1289434326970299194%26murl%3Dhttp%253A%252F%252Fwww.newegg.com%252FProduct%252FProduct.aspx%253Fcm%255Fmmc%253Dbac-tomshardwaresbm-%255F-systembuildereditorial-%255F-Intel%2BMotherboards-%255F-N82E16813128663%2526Item%253DN82E16813128663%2526IsFeedbackTab%253DTrue%2526nm%255Fmc%253DExtBanner )

Gigabyte GA-F2A88XN-WIFI

View Deal

Image ](https://shop-links.co/link/?exclusive=1&publisher_slug=itechdaily19598&url=https%3A%2F%2Fclick.linksynergy.com%2Fdeeplink%3Fid%3DkXQk6%252AivFEQ%26mid%3D44583%26u1%3Dtomshardware-us-8198437440134718399%26murl%3Dhttp%253A%252F%252Fwww.newegg.com%252FProduct%252FProduct.aspx%253Fcm%255Fmmc%253Dbac-tomshardwaresbm-%255F-systembuildereditorial-%255F-CPU%2BFans%2B%2526%2BHeatsinks-%255F-N82E16835856007%2526Item%253DN82E16835856007%2526IsFeedbackTab%253DTrue%2526nm%255Fmc%253DExtBanner )

Deepcool Gamer Storm Gabriel

View Deal

Assembly

The only significant change in assembly of this against the Intel build is the CPU cooler. And I ran into fitment issues with it. While I specifically got the low profile version Ballistix memory kit, AMD’s rectangular mounting bracket meant the cooler could only be installed in two orientations. Both are problematic with this motherboard. The Gabriel is thinnest on the end opposite of the heat pipe curve. This part extends farthest from the CPU socket and can clear most RAM modules. On either side, the fins have a small step making them a little thicker. This edge of the cooler is a millimeter or two too thick to fully clear the RAM on the side, touching the very top edge of the RAM heat spreader.

If the fins were a little thinner or my RAM didn’t have a heat spreader, this would be a non-issue. It’s still not technically a problem. It doesn’t keep the RAM from being installed, it doesn’t even put flex on the RAM stick. It’s just annoying that a cooler marketed as designed specifically for ITX cooling seems to be borderline incompatible with every current AMD ITX motherboard (every model on Newegg right now has the CPU socket oriented the same way). Perhaps some of them have RAM slots a little farther from the CPU socket, which would solve this, but if Deepcool wanted to be universally compatible, shaving a few millimeters off the fins would have accomplished this without impacting thermal performance.

Software Update Pro - Check and update software installed on your computer.

The rest of the assembly went just peachy. The slightly different port layout of the motherboard necessitated different cable routing, but that’s it. Everything else is the exact same as the Intel build from a few days ago.

Overclocking

I did a little more digging on 860K overclocking after last quarter. Most FM2+ motherboards are very liberal with CPU voltage at stock levels. This means it’s usually possible to overclock the CPU while undervolting it. This held true for my particular 860K. Stock voltage was set at 1.45V, but I was able to get it to run at 4.0GHz on only 1.35V. Lowering the voltage helped temperatures, but the CPU still has a pretty hard thermal ceiling that won’t let it be pushed as much as it could. Regardless of cooling solution or voltage, the CPU cuts back to 3.5 to 3.7GHz when it hits 65 degrees C (total, not over ambient). Even with the cooler at full speed, I was occasionally hitting that ceiling under the most demanding workloads.

I started exploring my options for dynamic clock multipliers in response to workload, but my motherboard didn’t support anything like that. It didn’t even have per-core overclocking, so I couldn’t set up a tiered approach for single- and multi-threadedbenchmarks . All I had was the base and turbo multipliers. A meager 1.375V was enough for 4.3GHz at most workloads, but I wondered if a lower multiplier would yield better overall results since it wouldn’t hit the thermal ceiling as often and could sustain the maximum overclock for longer durations.

I ran a few passes at different speeds and compared the results. A base 42 / turbo 43 configuration meant the CPU would turbo up to 4.3GHz when able, but would first drop to 4.2GHz before going down to 3.7GHz when getting hot. This performed well for the most part, but I found the CPU wasn’t spinning up to its turbo clock as often as it could. In the end, I went with a straight 4.3GHz clock. The loads that triggered throttling would drop the CPU to 3.7 GHz regardless of the overclocked multiplier.

Image 1 of 3

The RAM caused me no end of heartburn and frustration. I kept running into seemingly random crashes, regardless of RAM timings. I worried the RAM was somehow bad, but it worked flawlessly in the Intel build. After a quick appeal for help to Thomas, I found the motherboard simply required at least 1.64V to run the RAM, even at stock speeds. Again, the Intel build had no problem with 1.5V. I’ve never seen a motherboard that’s more stable overclocked than at stock speeds, until now.

My system this time around was only capable of reaching DDR3-2133, a bit shy of the 2400 speeds I got last quarter. I did get respectable timings of 10-11-10-31, but that was the limit. Along with the RAM, I upped the northbridge from 1800 to 2000MHz with only a slight bump in voltage to 1.1625V. I wasn’t trying to match the frequency of last quarter, I simply couldn’t boot the machine at anything past 2000MHz.

I’ve used the exact same GPU three times now, and that makes overclocking it easy. As the last two were stable at the exact same settings, I used those again here. This GTX 970 wasn’t quite as overclocking friendly as the last two and sometimes crashed at higher detail settings at the faster settings. In the interest of making the benchmarks as comparable as possible, I used the GPU from the Intel build for the benchmarks here.

Also read: